170 × 260 × 42 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 170 mm bore × 260 mm outside diameter × 42 mm width deep groove ball bearing, ToolLoop's index holds 9 listings across NTN and NSK. In the shielded variant the cheapest listing is NSK at ¥37,335 against NTN at ¥38,559 — a 3.2% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6034open (no seal or shield)16100016100032347source
NSK6034ZZshielded, both sides16100016100037335source
NSK6034C3open (no seal or shield)16100016100039448source
NSK6034ZSshielded, one side16100016100044003source
NSK6034Mopen (no seal or shield)16100016100046662source
NTN6034open (no seal or shield)168000—33314source
NTN6034C3open (no seal or shield)168000—34653source
NTN6034ZZ/2ASshielded, both sides168000—38559source
NTN6034ZZshielded, both sides168000—42283source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 170 mm bore falls in the ISO 286 band 120–180 mm, where IT7 is 40 µm wide. If the shaft seat is machined to h6, the shaft measures 169.975 to 170.000 mm; a H7/h6 pair at this nominal gives 0 to +65 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.