190 × 240 × 24 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 190 × 240 × 24 mm deep groove ball bearing, ToolLoop's index holds 2 NTN and NSK listings; the lowest list price is ¥49,229 (MISUMI Japan, fetched 2026-11-15). No like-for-like pair exists in the same sealing variant, so no brand comparison is made.
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6838VVrubber seal730009350049229source
NTN6838open (no seal or shield)73000—58891source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 190 mm bore falls in the ISO 286 band 180–250 mm, where IT7 is 46 µm wide. If the shaft seat is machined to h6, the shaft measures 189.971 to 190.000 mm; a H7/h6 pair at this nominal gives 0 to +75 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.