190 × 290 × 46 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 190 mm bore × 290 mm outside diameter × 46 mm width deep groove ball bearing, ToolLoop's index holds 5 listings across NTN and NSK. In the shielded variant the cheapest listing is NSK at ¥43,137 against NTN at ¥44,287 — a 2.6% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6038open (no seal or shield)18800020100040851source
NSK6038ZZshielded, both sides18800020100043137source
NSK6038Mopen (no seal or shield)18800020100054531source
NSK6038MC3open (no seal or shield)18800020100055133source
NTN6038ZZ/2ASshielded, both sides197000—44287source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 190 mm bore falls in the ISO 286 band 180–250 mm, where IT7 is 46 µm wide. If the shaft seat is machined to h6, the shaft measures 189.971 to 190.000 mm; a H7/h6 pair at this nominal gives 0 to +75 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.