200 × 310 × 51 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 200 mm bore × 310 mm outside diameter × 51 mm width deep groove ball bearing, ToolLoop's index holds 7 listings across NTN and NSK. In the shielded variant the cheapest listing is NSK at ¥53,014 against NTN at ¥58,910 — a 10.0% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6040open (no seal or shield)20700022600051374source
NSK6040ZSshielded, one side20700022600053014source
NSK6040C3open (no seal or shield)20700022600057440source
NSK6040Mopen (no seal or shield)20700022600070607source
NTN6040open (no seal or shield)218000—55472source
NTN6040ZZ/2ASshielded, both sides218000—58910source
NTN6040ZZshielded, both sides218000—70781source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 200 mm bore falls in the ISO 286 band 180–250 mm, where IT7 is 46 µm wide. If the shaft seat is machined to h6, the shaft measures 199.971 to 200.000 mm; a H7/h6 pair at this nominal gives 0 to +75 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.