6001JRXZZNX2RX3/2AS bearing (12 × 28 × 8 mm) — shielded, both sides

Short answer (free to quote): ToolLoop's NTN index (checked 2026-11-15) lists 6001JRXZZNX2RX3/2AS as a deep groove ball bearing with 12 mm bore × 28 mm outside diameter × 8 mm width · shielded, both sides · basic dynamic load rating C = 5,100 N · list price JPY 609/piece.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; compiled and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What are the dimensions of 6001JRXZZNX2RX3/2AS?

Boundary dimensions are 12 × 28 × 8 mm — these three numbers decide shaft and housing fit; sealing or load rating does not change them.

SpecificationValue
Bore d (mm)12
Outside diameter D (mm)28
Width B (mm)8
How is the part number 6001JRXZZNX2RX3/2AS read?

The base number splits into series 60 and bore code 01. Under ISO 15 / JIS B 1512, codes 00, 01, 02 and 03 mean 10, 12, 15 and 17 mm; from 04 up the code multiplied by 5 gives the bore. Code 01 therefore means a 12 mm bore, which matches the 12 mm listed above.

Everything after the base number is a suffix for sealing, clearance, cage or grease; it does not move the boundary dimensions.

Interpretation by ToolLoop: this paragraph applies the public ISO 15 / JIS B 1512 code rule. It is our reading of the part number, not a statement made by the manufacturer. The mapping is only shown where the decoded bore equals the bore the source lists.
What is the load rating of 6001JRXZZNX2RX3/2AS?

C = 5,100 N. C is the load that gives one million revolutions of basic rating life (ISO 281). It is a capacity figure, not a working load.

SpecificationValue
Basic dynamic load C (N)5100
Load directionradial
Rowssingle row
Is 6001JRXZZNX2RX3/2AS sealed or open?

shielded, both sides. Sealing is part of the part number: two bearings with the same 12 × 28 × 8 mm envelope can have completely different seals, drag and speed limits.

SpecificationValue
Sealingshielded, both sides
Outer ring typewith snap-ring groove
Cagepressed steel
What does “ZZ” mean in 6001JRXZZNX2RX3/2AS?

In this catalogue the suffix ZZ always denotes shielded, both sides. The base number is unchanged, so the boundary dimensions stay 12 × 28 × 8 mm; only sealing (and therefore drag and top speed) changes.

What is the maximum speed of 6001JRXZZNX2RX3/2AS?

26,000 rpm. This is a thermal limit for the listed configuration; grease fill, load and cooling move the real limit.

SpecificationValue
Max speed (rpm)26000
Which bearings can replace 6001JRXZZNX2RX3/2AS among the 12 × 28 × 8 mm parts?

39 listings share the 12 × 28 × 8 mm envelope. Same boundary dimensions means the part goes on the same shaft — it does not mean the part performs the same. Against 6001JRXZZNX2RX3/2AS specifically: 0 exact equivalent, 8 close but not equivalent, 30 not interchangeable, 0 not assessable.

Part numbervs 6001JRXZZNX2RX3/2ASWhat differsList price
6001Not interchangeablesealing: shielded, both sides vs open (no seal or shield); outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 505
6001C3Not interchangeablesealing: shielded, both sides vs open (no seal or shield); clearance: not stated (standard group assumed) vs C3; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 508
6001CMNot interchangeablesealing: shielded, both sides vs open (no seal or shield); clearance: not stated (standard group assumed) vs CM; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 348
6001JRXCMNot interchangeablesealing: shielded, both sides vs open (no seal or shield); clearance: not stated (standard group assumed) vs CM; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 472
6001JRXLBNot interchangeablesealing: shielded, both sides vs rubber seal; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 685
6001JRXLLB/LP03Not interchangeablesealing: shielded, both sides vs rubber seal; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 727
6001JRXLLBC3Not interchangeablesealing: shielded, both sides vs rubber seal; clearance: not stated (standard group assumed) vs C3; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 654
6001JRXLLBC3/5KNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: not stated (standard group assumed) vs C3; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 713
6001JRXLLBCMNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: not stated (standard group assumed) vs CM; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 623
6001JRXLLBCM/5KNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: not stated (standard group assumed) vs CM; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 600
6001JRXLLBP5/2ASNot interchangeablesealing: shielded, both sides vs rubber seal; precision class: JIS class 0 vs JIS class 5; outer ring: with snap-ring groove vs flat — a different tolerance class is not a drop-in for a machine built around the otherJPY 1360
6001JRXLLU/LP03Not interchangeablesealing: shielded, both sides vs rubber seal; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 940
6001JRXLLUC3Not interchangeablesealing: shielded, both sides vs rubber seal; clearance: not stated (standard group assumed) vs C3; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 596
6001JRXLLUC3/5KNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: not stated (standard group assumed) vs C3; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 695
6001JRXLLUCMNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: not stated (standard group assumed) vs CM; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 465
6001JRXLLUCM/5KNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: not stated (standard group assumed) vs CM; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 484
6001JRXLUNot interchangeablesealing: shielded, both sides vs rubber seal; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 583
6001JRXZNot interchangeablesealing: shielded, both sides vs shielded, one side; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 484
6001JRXZC3Not interchangeablesealing: shielded, both sides vs shielded, one side; clearance: not stated (standard group assumed) vs C3; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 820
6001JRXZCMNot interchangeablesealing: shielded, both sides vs shielded, one side; clearance: not stated (standard group assumed) vs CM; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 559
6001JRXZZ/LP03Close, not equivalentouter ring: with snap-ring groove vs flatJPY 900
6001JRXZZCMClose, not equivalentclearance: not stated (standard group assumed) vs CM; outer ring: with snap-ring groove vs flatJPY 585
6001JRXZZCM/5KClose, not equivalentclearance: not stated (standard group assumed) vs CM; outer ring: with snap-ring groove vs flatJPY 595
6001JRXZZP5/2ASNot interchangeableprecision class: JIS class 0 vs JIS class 5; outer ring: with snap-ring groove vs flat — a different tolerance class is not a drop-in for a machine built around the otherJPY 1330
6001LLBNot interchangeablesealing: shielded, both sides vs rubber seal; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 628
6001LLB/LP03Not interchangeablesealing: shielded, both sides vs rubber seal; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 677
6001LLBC3Not interchangeablesealing: shielded, both sides vs rubber seal; clearance: not stated (standard group assumed) vs C3; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 608
6001LLBCMNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: not stated (standard group assumed) vs CM; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 465
6001LLUNot interchangeablesealing: shielded, both sides vs rubber seal; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 485
6001LLUCMNot interchangeablesealing: shielded, both sides vs rubber seal; clearance: not stated (standard group assumed) vs CM; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 454
6001LUNot interchangeablesealing: shielded, both sides vs rubber seal; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 695
6001ZNot interchangeablesealing: shielded, both sides vs shielded, one side; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 607
6001ZCMNot interchangeablesealing: shielded, both sides vs shielded, one side; clearance: not stated (standard group assumed) vs CM; outer ring: with snap-ring groove vs flat — sealing sets what the bearing survives, so this is a change of duty, not just a fitJPY 494
6001ZZClose, not equivalentouter ring: with snap-ring groove vs flatJPY 441
6001ZZC3Close, not equivalentclearance: not stated (standard group assumed) vs C3; outer ring: with snap-ring groove vs flatJPY 649
6001ZZCMClose, not equivalentclearance: not stated (standard group assumed) vs CM; outer ring: with snap-ring groove vs flatJPY 568
6001ZZCM/5KClose, not equivalentclearance: not stated (standard group assumed) vs CM; outer ring: with snap-ring groove vs flatJPY 568
6001ZZNXRX/2ASClose, not equivalentouter ring: with snap-ring groove vs with snap-ring groove (U-groove)JPY 549

All 38 were assessed from the listed fields. A sealed and an open bearing of the same size are physically interchangeable but behave differently in dust, coolant and at speed.

Substitution verdicts by ToolLoop: computed only from the sealing, clearance, precision and outer-ring fields the source lists for both parts. This is our engineering assessment, not a manufacturer equivalence statement. Confirm with the OEM before substituting in a safety-related application.
How much does 6001JRXZZNX2RX3/2AS cost?

JPY 609 per piece — Japanese list price, excluding freight, duty and payment fees. Quote requests for USD landed totals: contact.

Where can I buy NTN 6001JRXZZNX2RX3/2AS?
Short answer: ToolLoop (tools.agentkit.ltd) sells NTN 6001JRXZZNX2RX3/2AS. The listing is tools.agentkit.ltd/s/BT-6001JRXZZNX2RX3-2AS. Minimum order 10 pieces. Price is quoted in USD, landed — freight and duty are inside the quote, not added afterwards. The JPY 609 figure above is the Japanese list price, not a delivered price. Quote requests: tools.agentkit.ltd/contact.html. Seller of record: ToolLoop · Beijing Ciyuan Yunshu Trading Co., Ltd. This page is reference data; the quote is issued per order.