Bearings with 10 × 26 × 8 mm boundary dimensions — 27 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 27 part numbers with 10 × 26 × 8 mm boundary dimensions, in 14 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 10 × 26 × 8 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 6 parts
6000LBrubber seal4550JPY 681
6000LLBrubber seal4550JPY 469
6000LLB/LP03rubber seal4550JPY 940
6000LLUrubber seal4550JPY 493
6000LLU/LP03rubber seal4550JPY 661
6000LUrubber seal4550JPY 736
rubber seal · clearance CM · JIS class 0 · outer ring flat — 4 parts
6000LLBCMrubber seal4550JPY 629
6000LLBCM/5Krubber seal4550JPY 664
6000LLUCMrubber seal4550JPY 460
6000LLUCM/5Krubber seal4550JPY 476
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 3 parts
6000LLBC3rubber seal4550JPY 605
6000LLUC3rubber seal4550JPY 469
6000LLUC3/5Krubber seal4550JPY 588
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6000ZZshielded, both sides4550JPY 426
6000ZZ/LP03shielded, both sides4550JPY 756
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6000ZZC3shielded, both sides4550JPY 693
6000ZZC3/5Kshielded, both sides4550JPY 630
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 2 parts
6000ZZCMshielded, both sides4550JPY 409
6000ZZCM/5Kshielded, both sides4550JPY 424
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6000open (no seal or shield)4550JPY 502
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6000C3open (no seal or shield)4550JPY 559
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6000CMopen (no seal or shield)4550JPY 537
open (no seal or shield) · clearance not stated · JIS class 5 · outer ring flat — 1 part
6000P5open (no seal or shield)4550JPY 1280
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6000Zshielded, one side4550JPY 426
shielded, one side · clearance C3 · JIS class 0 · outer ring flat — 1 part
6000ZC3shielded, one side4550JPY 589
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6000ZCMshielded, one side4550JPY 452
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6000ZZNRshielded, both sides4550JPY 475

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.