Bearings with 12 × 32 × 10 mm boundary dimensions — 35 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 35 part numbers with 12 × 32 × 10 mm boundary dimensions, in 18 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 12 × 32 × 10 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 6 parts
6201LBrubber seal6100JPY 604
6201LLBrubber seal6100JPY 680
6201LLUrubber seal6100JPY 473
6201LLU/2ASrubber seal6100JPY 414
6201LLU/LP03rubber seal6100JPY 900
6201LUrubber seal6100JPY 627
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 4 parts
6201LLBC3rubber seal6100JPY 596
6201LLBC3/5Krubber seal6100JPY 667
6201LLUC3rubber seal6100JPY 628
6201LLUC3/5Krubber seal6100JPY 649
rubber seal · clearance CM · JIS class 0 · outer ring flat — 4 parts
6201LLBCMrubber seal6100JPY 412
6201LLBCM/5Krubber seal6100JPY 439
6201LLUCMrubber seal6100JPY 628
6201LLUCM/5Krubber seal6100JPY 423
rubber seal · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6201LLBNR/2ASrubber seal6100JPY 860
6201LLUNR/2ASrubber seal6100JPY 860
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6201ZZshielded, both sides6100JPY 343
6201ZZ/LP03shielded, both sides6100JPY 860
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6201ZZC3shielded, both sides6100JPY 633
6201ZZC3/5Kshielded, both sides6100JPY 358
shielded, both sides · clearance C4 · JIS class 0 · outer ring flat — 2 parts
6201ZZC4shielded, both sides6100JPY 473
6201ZZC4/5Kshielded, both sides6100JPY 525
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 2 parts
6201ZZCMshielded, both sides6100JPY 537
6201ZZCM/5Kshielded, both sides6100JPY 393
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6201ZZNRshielded, both sides6100JPY 395
6201ZZNR/2ASshielded, both sides6100JPY 547
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6201open (no seal or shield)6100JPY 454
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6201C3open (no seal or shield)6100JPY 513
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6201CMopen (no seal or shield)6100JPY 339
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6201NRopen (no seal or shield)6100JPY 800
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6201Zshielded, one side6100JPY 540
shielded, one side · clearance C3 · JIS class 0 · outer ring flat — 1 part
6201ZC3shielded, one side6100JPY 790
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6201ZCMshielded, one side6100JPY 443
shielded, one side · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6201ZNRshielded, one side6100JPY 784
shielded, both sides · clearance C3 · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6201ZZNRC3/5Kshielded, both sides6100JPY 830

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.