Bearings with 17 × 35 × 10 mm boundary dimensions — 34 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 34 part numbers with 17 × 35 × 10 mm boundary dimensions, in 17 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 17 × 35 × 10 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 5 parts
6003LLBrubber seal6800JPY 458
6003LLB/LP03rubber seal6800JPY 723
6003LLUrubber seal6800JPY 552
6003LLU/LP03rubber seal6800JPY 722
6003LUrubber seal6800JPY 798
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 4 parts
6003LLBC3rubber seal6800JPY 644
6003LLBC3/5Krubber seal6800JPY 793
6003LLUC3rubber seal6800JPY 783
6003LLUC3/5Krubber seal6800JPY 425
rubber seal · clearance CM · JIS class 0 · outer ring flat — 4 parts
6003LLBCMrubber seal6800JPY 676
6003LLBCM/5Krubber seal6800JPY 644
6003LLUCMrubber seal6800JPY 630
6003LLUCM/5Krubber seal6800JPY 747
rubber seal · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 3 parts
6003LLBNR/2ASrubber seal6800JPY 950
6003LLUNRrubber seal6800JPY 732
6003LLUNR/2ASrubber seal6800JPY 950
rubber seal · clearance not stated · JIS class 5 · outer ring flat — 3 parts
6003LLBP5rubber seal6800JPY 1555
6003LLBP5/2ASrubber seal6800JPY 1488
6003LLUP5/2ASrubber seal6800JPY 1480
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6003ZZshielded, both sides6800JPY 633
6003ZZ/LP03shielded, both sides6800JPY 940
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6003ZZC3shielded, both sides6800JPY 517
6003ZZC3/5Kshielded, both sides6800JPY 767
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6003ZZNRshielded, both sides6800JPY 506
6003ZZNR/2ASshielded, both sides6800JPY 505
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6003open (no seal or shield)6800JPY 582
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6003C3open (no seal or shield)6800JPY 608
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6003CMopen (no seal or shield)6800JPY 319
open (no seal or shield) · clearance not stated · JIS class 5 · outer ring flat — 1 part
6003P5open (no seal or shield)6800JPY 2034
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6003Zshielded, one side6800JPY 498
shielded, one side · clearance C3 · JIS class 0 · outer ring flat — 1 part
6003ZC3shielded, one side6800JPY 558
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6003ZCMshielded, one side6800JPY 734
shielded, one side · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6003ZNRshielded, one side6800JPY 910
shielded, both sides · clearance C4 · JIS class 0 · outer ring flat — 1 part
6003ZZC4/5Kshielded, both sides6800JPY 860

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.