Bearings with 25 × 47 × 12 mm boundary dimensions — 35 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 35 part numbers with 25 × 47 × 12 mm boundary dimensions, in 19 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 25 × 47 × 12 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 6 parts
6005LLBrubber seal10100JPY 688
6005LLB/LP03rubber seal10100JPY 1100
6005LLUrubber seal10100JPY 688
6005LLU/LP03rubber seal10100JPY 865
6005LUrubber seal10100JPY 914
SSN005LL/LP03rubber seal7750JPY 4948
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 4 parts
6005LLBC3rubber seal10100JPY 890
6005LLBC3/5Krubber seal10100JPY 881
6005LLUC3rubber seal10100JPY 949
6005LLUC3/5Krubber seal10100JPY 663
rubber seal · clearance CM · JIS class 0 · outer ring flat — 4 parts
6005LLBCMrubber seal10100JPY 576
6005LLBCM/5Krubber seal10100JPY 611
6005LLUCMrubber seal10100JPY 749
6005LLUCM/5Krubber seal10100JPY 628
rubber seal · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6005LLUNRrubber seal10100JPY 819
6005LLUNR/2ASrubber seal10100JPY 877
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6005ZZshielded, both sides10100JPY 636
6005ZZ/LP03shielded, both sides10100JPY 1030
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 2 parts
6005ZZC3shielded, both sides10100JPY 690
6005ZZC3/5Kshielded, both sides10100JPY 948
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 2 parts
6005ZZCMshielded, both sides10100JPY 591
6005ZZCM/5Kshielded, both sides10100JPY 567
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 2 parts
6005ZZNRshielded, both sides10100JPY 690
6005ZZNR/2ASshielded, both sides10100JPY 768
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6005open (no seal or shield)10100JPY 513
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6005C3open (no seal or shield)10100JPY 739
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 1 part
6005CMopen (no seal or shield)10100JPY 643
rubber seal · clearance not stated · JIS class 5 · outer ring flat — 1 part
6005LLUP5/2ASrubber seal10100JPY 1710
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6005NRopen (no seal or shield)10100JPY 809
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 1 part
6005Zshielded, one side10100JPY 733
shielded, one side · clearance C3 · JIS class 0 · outer ring flat — 1 part
6005ZC3shielded, one side10100JPY 930
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 1 part
6005ZCMshielded, one side10100JPY 764
shielded, one side · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6005ZNRshielded, one side10100JPY 724
shielded, both sides · clearance C4 · JIS class 0 · outer ring flat — 1 part
6005ZZC4/5Kshielded, both sides10100JPY 930
shielded, both sides · clearance C3 · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6005ZZNRC3/2ASshielded, both sides10100JPY 990

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.