100 × 140 × 20 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 100 mm bore × 140 mm outside diameter × 20 mm width deep groove ball bearing, ToolLoop's index holds 10 listings across NTN and NSK. In the open variant the cheapest listing is NTN at ¥7,180 against NSK at ¥9,581 — a 33.4% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6920DDUrubber seal43000420008122source
NSK6920VVrubber seal43000420008479source
NSK6920ZZshielded, both sides43000420008872source
NSK6920open (no seal or shield)43000420009581source
NTN6920open (no seal or shield)41000—7180source
NTN6920ZZshielded, both sides41000—8139source
NTN6920ZZ/2ASshielded, both sides41000—8206source
NTN6920LLUrubber seal41000—8504source
NTN6920LLB/2ASrubber seal41000—9208source
NTN6920LLBrubber seal41000—9543source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 100 mm bore falls in the ISO 286 band 80–120 mm, where IT7 is 35 µm wide. If the shaft seat is machined to h6, the shaft measures 99.978 to 100.000 mm; a H7/h6 pair at this nominal gives 0 to +57 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.