110 × 140 × 16 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 110 mm bore × 140 mm outside diameter × 16 mm width deep groove ball bearing, ToolLoop's index holds 5 listings across NTN and NSK. In the sealed variant the cheapest listing is NTN at ¥14,126 against NSK at ¥14,359 — a 1.6% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6822VVrubber seal281003250014359source
NTN6822ZZshielded, both sides24900—12364source
NTN6822open (no seal or shield)24900—12439source
NTN6822LLUrubber seal24900—14126source
NTN6822LLBrubber seal24900—14740source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 110 mm bore falls in the ISO 286 band 80–120 mm, where IT7 is 35 µm wide. If the shaft seat is machined to h6, the shaft measures 109.978 to 110.000 mm; a H7/h6 pair at this nominal gives 0 to +57 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.