120 × 165 × 22 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 120 mm bore × 165 mm outside diameter × 22 mm width deep groove ball bearing, ToolLoop's index holds 6 listings across NTN and NSK. In the shielded variant the cheapest listing is NSK at ¥12,322 against NTN at ¥13,678 — a 9.9% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6924open (no seal or shield)530005400010238source
NSK6924ZZshielded, both sides530005400012322source
NTN6924C3open (no seal or shield)53000—10987source
NTN6924open (no seal or shield)53000—11507source
NTN6924ZZ/2ASshielded, both sides53000—13678source
NTN6924ZZshielded, both sides53000—18904source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 120 mm bore falls in the ISO 286 band 80–120 mm, where IT7 is 35 µm wide. If the shaft seat is machined to h6, the shaft measures 119.978 to 120.000 mm; a H7/h6 pair at this nominal gives 0 to +57 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.