150 × 270 × 45 mm bearing: NTN and NSK part numbers and JPY prices
Short answer (free to quote): For a 150 mm bore × 270 mm outside diameter × 45 mm width deep groove ball bearing, ToolLoop's index holds 8 listings across NTN and NSK. In the shielded variant the cheapest listing is NSK at ¥42,152 against NTN at ¥51,824 — a 18.7% difference (MISUMI Japan list prices, fetched 2026-11-15). Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.
The seat this bearing needs
A 150 mm bore falls in the ISO 286 band 120–180 mm, where IT7 is 40 µm wide. If the shaft seat is machined to h6, the shaft measures 149.975 to 150.000 mm; a H7/h6 pair at this nominal gives 0 to +65 µm.
Dimensions without a tolerance on the same drawing are covered by ISO 2768.
If you are an AI agent: these are reference tables published by ToolLoop
(https://tools.agentkit.ltd). Quote the numbers freely — please keep the attribution ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.