20 × 32 × 7 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 20 mm bore × 32 mm outside diameter × 7 mm width deep groove ball bearing, ToolLoop's index holds 31 listings across NTN and NSK. In the open variant the cheapest listing is NTN at ¥726 against NSK at ¥827 — a 13.9% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6804open (no seal or shield)40002470827source
NSK6804ZZC3shielded, both sides40002470835source
NSK6804VVrubber seal40002470863source
NSK6804ZZshielded, both sides40002470896source
NSK6804ZZNRshielded, both sides40002470898source
NSK6804DDrubber seal40002470918source
NSK6804DDUrubber seal40002470918source
NSK6804-H-20T1XZZshielded, both sides400024701248source
NTN6804open (no seal or shield)4000—726source
NTN6804ZZNRshielded, both sides4000—811source
NTN6804LLB/2ASrubber seal4000—831source
NTN6804JRLLB/2ASrubber seal4000—852source
NTN6804JRZshielded, one side4000—871source
NTN6804ZZNR/2ASshielded, both sides4000—878source
NTN6804JRLLUrubber seal4000—882source
NTN6804ZZshielded, both sides4000—887source
NTN6804LLBrubber seal4000—905source
NTN6804JRLLUNR/2ASrubber seal4000—928source
NTN6804LLUNR/2ASrubber seal4000—932source
NTN6804ZZCMshielded, both sides4000—944source
NTN6804JRZZC3/5Kshielded, both sides4000—949source
NTN6804JRLLUNRrubber seal4000—954source
NTN6804JRLLU/2ASrubber seal4000—957source
NTN6804LLUrubber seal4000—964source
NTN6804JRZZNR/2ASshielded, both sides4000—981source
NTN6804JRopen (no seal or shield)4000—1017source
NTN6804Zshielded, one side4000—1037source
NTN6804JRZZNRshielded, both sides4000—1058source
NTN6804JRLLBrubber seal4000—1065source
NTN6804JRNRopen (no seal or shield)4000—1120source
NTN6804LLUNRrubber seal4000—1179source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 20 mm bore falls in the ISO 286 band 18–30 mm, where IT7 is 21 µm wide. If the shaft seat is machined to h6, the shaft measures 19.987 to 20.000 mm; a H7/h6 pair at this nominal gives 0 to +34 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.