22 × 44 × 12 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 22 mm bore × 44 mm outside diameter × 12 mm width deep groove ball bearing, ToolLoop's index holds 11 listings across NTN and NSK. In the shielded variant the cheapest listing is NTN at ¥675 against NSK at ¥1,114 — a 65.0% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK60/22open (no seal or shield)94005050828source
NSK60/22ZZshielded, both sides940050501114source
NSK60/22DDUCMrubber seal940050501116source
NTN60/22ZZshielded, both sides9400—675source
NTN60/22ZZ/2ASshielded, both sides9400—796source
NTN60/22LLU/2ASrubber seal9400—822source
NTN60/22open (no seal or shield)9400—906source
NTN60/22LLUrubber seal9400—920source
NTN60/22LLBrubber seal9400—1054source
NTN60/22LLB/2ASrubber seal9400—1056source
NTN60/22ZZNR/2ASshielded, both sides9400—1127source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 22 mm bore falls in the ISO 286 band 18–30 mm, where IT7 is 21 µm wide. If the shaft seat is machined to h6, the shaft measures 21.987 to 22.000 mm; a H7/h6 pair at this nominal gives 0 to +34 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.