22 × 56 × 16 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 22 mm bore × 56 mm outside diameter × 16 mm width deep groove ball bearing, ToolLoop's index holds 9 listings across NTN and NSK. In the sealed variant the cheapest listing is NTN at ¥1,270 against NSK at ¥1,717 — a 35.2% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK63/22open (no seal or shield)1840092501282source
NSK63/22DDUrubber seal1840092501717source
NTN63/22ZZshielded, both sides18400—1059source
NTN63/22C3open (no seal or shield)18400—1110source
NTN63/22ZZ/2ASshielded, both sides18400—1258source
NTN63/22LLUC3/2ASrubber seal18400—1270source
NTN63/22open (no seal or shield)18400—1287source
NTN63/22LLUrubber seal18400—1412source
NTN63/22LLU/2ASrubber seal18400—1748source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 22 mm bore falls in the ISO 286 band 18–30 mm, where IT7 is 21 µm wide. If the shaft seat is machined to h6, the shaft measures 21.987 to 22.000 mm; a H7/h6 pair at this nominal gives 0 to +34 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.