| Brand | Part number | Sealing | C (N) | C0 (N) | List price (JPY) | Source |
|---|---|---|---|---|---|---|
| NSK | 60/28ADDU | rubber seal | 12500 | 7400 | 1253 | source |
| NSK | 60/28ADDUCM | rubber seal | 12500 | 7400 | 1308 | source |
| NTN | 60/28ZZ | shielded, both sides | 12500 | — | 772 | source |
| NTN | 60/28LLB/2AS | rubber seal | 12500 | — | 828 | source |
| NTN | 60/28ZZ/2AS | shielded, both sides | 12500 | — | 860 | source |
| NTN | 60/28LLU/2AS | rubber seal | 12500 | — | 1015 | source |
| NTN | 60/28Z | shielded, one side | 1250 (inconsistent with other listings of this size) | — | 1040 | source |
| NTN | 60/28LLU | rubber seal | 12500 | — | 1051 | source |
| NTN | 60/28 | open (no seal or shield) | 12500 | — | 1079 | source |
A 28 mm bore falls in the ISO 286 band 18–30 mm, where IT7 is 21 µm wide. If the shaft seat is machined to h6, the shaft measures 27.987 to 28.000 mm; a H7/h6 pair at this nominal gives 0 to +34 µm.
Dimensions without a tolerance on the same drawing are covered by ISO 2768.
ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.