30 × 37 × 4 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 30 mm bore × 37 mm outside diameter × 4 mm width deep groove ball bearing, ToolLoop's index holds 7 listings across NTN and NSK. In the sealed variant the cheapest listing is NTN at ¥2,089 against NSK at ¥2,620 — a 25.4% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6706open (no seal or shield)11409472011source
NSK6706U-Hopen (no seal or shield)9697572207source
NSK6706VVrubber seal11409472620source
NSK6706-H-VVrubber seal9697573260source
NTN6706open (no seal or shield)1140—1998source
NTN6706LLFrubber seal1140—2089source
NTN6706LLF/5Krubber seal1140—2367source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 30 mm bore falls in the ISO 286 band 18–30 mm, where IT7 is 21 µm wide. If the shaft seat is machined to h6, the shaft measures 29.987 to 30.000 mm; a H7/h6 pair at this nominal gives 0 to +34 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.