32 × 65 × 17 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 32 mm bore × 65 mm outside diameter × 17 mm width deep groove ball bearing, ToolLoop's index holds 6 listings across NTN and NSK. In the shielded variant the cheapest listing is NTN at ¥1,474 against NSK at ¥1,582 — a 7.3% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK62/32ZZshielded, both sides20700116001582source
NTN62/32ZZshielded, both sides20700—1474source
NTN62/32ZZ/2ASshielded, both sides20700—1505source
NTN62/32LLU/2ASrubber seal20700—1599source
NTN62/32LLUrubber seal20700—1897source
NTN62/32open (no seal or shield)20700—2041source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 32 mm bore falls in the ISO 286 band 30–50 mm, where IT7 is 25 µm wide. If the shaft seat is machined to h6, the shaft measures 31.984 to 32.000 mm; a H7/h6 pair at this nominal gives 0 to +41 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.