55 × 80 × 13 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 55 mm bore × 80 mm outside diameter × 13 mm width deep groove ball bearing, ToolLoop's index holds 11 listings across NTN and NSK. In the open variant the cheapest listing is NSK at ¥1,714 against NTN at ¥2,540 — a 32.5% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6911C3open (no seal or shield)16000133001714source
NSK6911open (no seal or shield)16000133002081source
NSK6911ZZshielded, both sides16000133002177source
NSK6911VVrubber seal16000133002268source
NSK6911DDUrubber seal16000133002390source
NTN6911Zshielded, one side16000—1920source
NTN6911LLBrubber seal16000—2153source
NTN6911ZZNR/2ASshielded, both sides16000—2160source
NTN6911LLB/2ASrubber seal16000—2227source
NTN6911open (no seal or shield)16000—2540source
NTN6911LLUrubber seal16000—2929source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 55 mm bore falls in the ISO 286 band 50–80 mm, where IT7 is 30 µm wide. If the shaft seat is machined to h6, the shaft measures 54.981 to 55.000 mm; a H7/h6 pair at this nominal gives 0 to +49 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.