60 × 78 × 10 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 60 mm bore × 78 mm outside diameter × 10 mm width deep groove ball bearing, ToolLoop's index holds 11 listings across NTN and NSK. In the open variant the cheapest listing is NTN at ¥2,844 against NSK at ¥3,034 — a 6.7% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6812VVrubber seal11500109002753source
NSK6812open (no seal or shield)11500109003034source
NSK6812ZZshielded, both sides11500109003076source
NTN6812open (no seal or shield)11500—2844source
NTN6812LLUrubber seal11500—2884source
NTN6812LLBrubber seal11500—2898source
NTN6812LLB/2ASrubber seal11500—3079source
NTN6812LLB/5Krubber seal11500—3080source
NTN6812ZZshielded, both sides11500—3080source
NTN6812ZZ/2ASshielded, both sides11500—3428source
NTN6812LLU/2ASrubber seal11500—3795source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 60 mm bore falls in the ISO 286 band 50–80 mm, where IT7 is 30 µm wide. If the shaft seat is machined to h6, the shaft measures 59.981 to 60.000 mm; a H7/h6 pair at this nominal gives 0 to +49 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.