70 × 100 × 16 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 70 mm bore × 100 mm outside diameter × 16 mm width deep groove ball bearing, ToolLoop's index holds 11 listings across NTN and NSK. In the shielded variant the cheapest listing is NTN at ¥2,957 against NSK at ¥3,505 — a 18.5% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6914C3open (no seal or shield)23700212002724source
NSK6914DDUrubber seal23700212002984source
NSK6914open (no seal or shield)23700212003048source
NSK6914VVrubber seal23700212003248source
NSK6914ZZshielded, both sides23700212003505source
NTN6914open (no seal or shield)23700—2402source
NTN6914ZZ/2ASshielded, both sides23700—2957source
NTN6914LLU/2ASrubber seal23700—3149source
NTN6914ZZshielded, both sides23700—3253source
NTN6914LLUrubber seal23700—3915source
NTN6914LLB/2ASrubber seal23700—4625source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 70 mm bore falls in the ISO 286 band 50–80 mm, where IT7 is 30 µm wide. If the shaft seat is machined to h6, the shaft measures 69.981 to 70.000 mm; a H7/h6 pair at this nominal gives 0 to +49 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.