70 × 90 × 10 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 70 mm bore × 90 mm outside diameter × 10 mm width deep groove ball bearing, ToolLoop's index holds 10 listings across NTN and NSK. In the sealed variant the cheapest listing is NSK at ¥3,345 against NTN at ¥3,924 — a 14.8% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6814DDUrubber seal12100127003345source
NSK6814open (no seal or shield)12100127003720source
NSK6814DDrubber seal12100127003758source
NSK6814VVrubber seal12100127004000source
NSK6814ZZshielded, both sides12100127004088source
NTN6814ZZshielded, both sides12100—3655source
NTN6814open (no seal or shield)12100—3887source
NTN6814LLBrubber seal12100—3924source
NTN6814LLUrubber seal12100—3969source
NTN6814LLU/2ASrubber seal12100—4115source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 70 mm bore falls in the ISO 286 band 50–80 mm, where IT7 is 30 µm wide. If the shaft seat is machined to h6, the shaft measures 69.981 to 70.000 mm; a H7/h6 pair at this nominal gives 0 to +49 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.