75 × 115 × 20 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 75 mm bore × 115 mm outside diameter × 20 mm width deep groove ball bearing, ToolLoop's index holds 24 listings across NTN and NSK. In the open variant the cheapest listing is NTN at ¥2,814 against NSK at ¥3,410 — a 21.2% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6015DDUC3Erubber seal39500335003399source
NSK6015NRopen (no seal or shield)39500335003410source
NSK6015open (no seal or shield)39500335003596source
NSK6015ZZshielded, both sides39500335003609source
NSK6015DDUrubber seal39500335003874source
NSK6015ZCMshielded, one side39500335003967source
NSK6015Mopen (no seal or shield)39500335004053source
NSK6015MC3open (no seal or shield)39500335004262source
NSK6015P5open (no seal or shield)39500335008557source
NTN6015CMopen (no seal or shield)39500—2814source
NTN6015LLBCMrubber seal39500—3085source
NTN6015open (no seal or shield)39500—3190source
NTN6015ZZC3shielded, both sides39500—3218source
NTN6015LLUCMrubber seal39500—3228source
NTN6015ZZCMshielded, both sides39500—3371source
NTN6015LLBCM/5Krubber seal39500—3479source
NTN6015ZZshielded, both sides39500—3516source
NTN6015LLBrubber seal39500—3528source
NTN6015ZZCM/5Kshielded, both sides39500—3561source
NTN6015LLBC3/5Krubber seal39500—3812source
NTN6015LLUCM/5Krubber seal39500—4005source
NTN6015ZZC3/5Kshielded, both sides39500—4320source
NTN6015LLUrubber seal39500—4435source
NTN6015P5open (no seal or shield)39500—12385source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 75 mm bore falls in the ISO 286 band 50–80 mm, where IT7 is 30 µm wide. If the shaft seat is machined to h6, the shaft measures 74.981 to 75.000 mm; a H7/h6 pair at this nominal gives 0 to +49 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.