80 × 100 × 10 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 80 mm bore × 100 mm outside diameter × 10 mm width deep groove ball bearing, ToolLoop's index holds 7 listings across NTN and NSK. In the open variant the cheapest listing is NTN at ¥4,670 against NSK at ¥5,667 — a 21.3% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6816open (no seal or shield)12700145005667source
NSK6816ZZshielded, both sides12700145005695source
NTN6816open (no seal or shield)12700—4670source
NTN6816ZZshielded, both sides12700—5307source
NTN6816ZZ/2ASshielded, both sides12700—5640source
NTN6816LLU/2ASrubber seal12700—6069source
NTN6816LLUrubber seal12700—6428source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 80 mm bore falls in the ISO 286 band 50–80 mm, where IT7 is 30 µm wide. If the shaft seat is machined to h6, the shaft measures 79.981 to 80.000 mm; a H7/h6 pair at this nominal gives 0 to +49 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.