80 × 110 × 16 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 80 mm bore × 110 mm outside diameter × 16 mm width deep groove ball bearing, ToolLoop's index holds 10 listings across NTN and NSK. In the shielded variant the cheapest listing is NTN at ¥4,192 against NSK at ¥4,935 — a 17.7% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6916VVrubber seal25000240004308source
NSK6916ZZshielded, both sides25000240004935source
NTN6916ZZshielded, both sides24900—4192source
NTN6916ZZ/5Kshielded, both sides24900—4252source
NTN6916open (no seal or shield)24900—4798source
NTN6916ZZ/2ASshielded, both sides24900—4804source
NTN6916LLUrubber seal24900—4955source
NTN6916LLB/2ASrubber seal24900—5157source
NTN6916LLU/2ASrubber seal24900—5157source
NTN6916LLBrubber seal24900—6209source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 80 mm bore falls in the ISO 286 band 50–80 mm, where IT7 is 30 µm wide. If the shaft seat is machined to h6, the shaft measures 79.981 to 80.000 mm; a H7/h6 pair at this nominal gives 0 to +49 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.