85 × 150 × 28 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 85 mm bore × 150 mm outside diameter × 28 mm width deep groove ball bearing, ToolLoop's index holds 25 listings across NTN and NSK. In the shielded variant the cheapest listing is NTN at ¥4,668 against NSK at ¥5,102 — a 9.3% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6217C3Eopen (no seal or shield)84000620004229source
NSK6217open (no seal or shield)84000620004409source
NSK6217C4open (no seal or shield)84000620004915source
NSK6217NRopen (no seal or shield)84000620005095source
NSK6217ZCMshielded, one side84000620005102source
NSK6217DDUrubber seal84000620005958source
NSK6217VVrubber seal84000620006100source
NSK6217ZZshielded, both sides84000620006229source
NSK6217MC3open (no seal or shield)84000620006548source
NSK6217Mopen (no seal or shield)840006200010914source
NSK6217P5open (no seal or shield)840006200014596source
NTN6217C3open (no seal or shield)83500—4239source
NTN6217CMopen (no seal or shield)83500—4338source
NTN6217open (no seal or shield)83500—4373source
NTN6217ZZCMshielded, both sides83500—4668source
NTN6217ZZC3/5Kshielded, both sides83500—5021source
NTN6217NRopen (no seal or shield)83500—5154source
NTN6217ZZCM/5Kshielded, both sides83500—5297source
NTN6217LLBCMrubber seal83500—5457source
NTN6217Zshielded, one side83500—5481source
NTN6217ZZshielded, both sides83500—5660source
NTN6217ZC3shielded, one side83500—5850source
NTN6217LLBCM/5Krubber seal83500—5911source
NTN6217LLBrubber seal83500—6157source
NTN6217ZZC3shielded, both sides83500—6414source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 85 mm bore falls in the ISO 286 band 80–120 mm, where IT7 is 35 µm wide. If the shaft seat is machined to h6, the shaft measures 84.978 to 85.000 mm; a H7/h6 pair at this nominal gives 0 to +57 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.