90 × 115 × 13 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 90 mm bore × 115 mm outside diameter × 13 mm width deep groove ball bearing, ToolLoop's index holds 10 listings across NTN and NSK. In the shielded variant the cheapest listing is NTN at ¥7,225 against NSK at ¥7,961 — a 10.2% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6818open (no seal or shield)19000210006352source
NSK6818ZZshielded, both sides19000210007961source
NSK6818DDUrubber seal19000210008433source
NTN6818open (no seal or shield)19000—6398source
NTN6818ZZ/2ASshielded, both sides19000—7225source
NTN6818ZZ/5Kshielded, both sides19000—7429source
NTN6818LLB/2ASrubber seal19000—7987source
NTN6818LLBrubber seal19000—8291source
NTN6818LLUrubber seal19000—8388source
NTN6818LLU/2ASrubber seal19000—9811source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 90 mm bore falls in the ISO 286 band 80–120 mm, where IT7 is 35 µm wide. If the shaft seat is machined to h6, the shaft measures 89.978 to 90.000 mm; a H7/h6 pair at this nominal gives 0 to +57 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.