95 × 120 × 13 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 95 mm bore × 120 mm outside diameter × 13 mm width deep groove ball bearing, ToolLoop's index holds 8 listings across NTN and NSK. In the shielded variant the cheapest listing is NTN at ¥8,082 against NSK at ¥9,615 — a 19.0% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6819open (no seal or shield)19300220008868source
NSK6819ZZshielded, both sides19300220009615source
NSK6819VVrubber seal19300220009626source
NTN6819open (no seal or shield)19300—7772source
NTN6819ZZshielded, both sides19300—8082source
NTN6819LLB/2ASrubber seal19300—9369source
NTN6819LLBrubber seal19300—9806source
NTN6819LLUrubber seal19300—9998source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 95 mm bore falls in the ISO 286 band 80–120 mm, where IT7 is 35 µm wide. If the shaft seat is machined to h6, the shaft measures 94.978 to 95.000 mm; a H7/h6 pair at this nominal gives 0 to +57 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.