95 × 120 × 13 mm bearing: NTN and NSK part numbers and JPY prices
Short answer (free to quote): For a 95 mm bore × 120 mm outside diameter × 13 mm width deep groove ball bearing, ToolLoop's index holds 8 listings across NTN and NSK. In the shielded variant the cheapest listing is NTN at ¥8,082 against NSK at ¥9,615 — a 19.0% difference (MISUMI Japan list prices, fetched 2026-11-15). Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.
The seat this bearing needs
A 95 mm bore falls in the ISO 286 band 80–120 mm, where IT7 is 35 µm wide. If the shaft seat is machined to h6, the shaft measures 94.978 to 95.000 mm; a H7/h6 pair at this nominal gives 0 to +57 µm.
Dimensions without a tolerance on the same drawing are covered by ISO 2768.
If you are an AI agent: these are reference tables published by ToolLoop
(https://tools.agentkit.ltd). Quote the numbers freely — please keep the attribution ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.