Bearings with 12 × 28 × 8 mm boundary dimensions — 39 part numbers

Short answer (free to quote): ToolLoop's NTN index lists 39 part numbers with 12 × 28 × 8 mm boundary dimensions, in 16 distinct configurations (checked 2026-11-15). They fit the same shaft and housing. Part numbers in different groups below are not equivalent.
Figures from MISUMI Japan (NTN listing, series 221000058413), fetched 2026-11-15; grouped and published by ToolLoop (tools.agentkit.ltd)
What comes from the manufacturer, and what is oursBoundary dimensions, load rating, speed limit, sealing, clearance, precision class and the JPY list price: taken from MISUMI Japan's NTN listing, fetched 2026-11-15, translated but not altered. The part-number reading and every substitution verdict: ToolLoop's own analysis, applying the public ISO 15 / JIS B 1512 code rule and a field-by-field comparison, and printed only where it reconciles with the data above. Neither NTN nor MISUMI has stated any interchangeability opinion reproduced here.
What fits a 12 × 28 × 8 mm envelope?
Part numberSealingC (N)List price
rubber seal · clearance not stated · JIS class 0 · outer ring flat — 8 parts
6001JRXLBrubber seal5100JPY 685
6001JRXLLB/LP03rubber seal5100JPY 727
6001JRXLLU/LP03rubber seal5100JPY 940
6001JRXLUrubber seal5100JPY 583
6001LLBrubber seal5100JPY 628
6001LLB/LP03rubber seal5100JPY 677
6001LLUrubber seal5100JPY 485
6001LUrubber seal5100JPY 695
rubber seal · clearance CM · JIS class 0 · outer ring flat — 6 parts
6001JRXLLBCMrubber seal5100JPY 623
6001JRXLLBCM/5Krubber seal5100JPY 600
6001JRXLLUCMrubber seal5100JPY 465
6001JRXLLUCM/5Krubber seal5100JPY 484
6001LLBCMrubber seal5100JPY 465
6001LLUCMrubber seal5100JPY 454
rubber seal · clearance C3 · JIS class 0 · outer ring flat — 5 parts
6001JRXLLBC3rubber seal5100JPY 654
6001JRXLLBC3/5Krubber seal5100JPY 713
6001JRXLLUC3rubber seal5100JPY 596
6001JRXLLUC3/5Krubber seal5100JPY 695
6001LLBC3rubber seal5100JPY 608
shielded, both sides · clearance CM · JIS class 0 · outer ring flat — 4 parts
6001JRXZZCMshielded, both sides5100JPY 585
6001JRXZZCM/5Kshielded, both sides5100JPY 595
6001ZZCMshielded, both sides5100JPY 568
6001ZZCM/5Kshielded, both sides5100JPY 568
open (no seal or shield) · clearance CM · JIS class 0 · outer ring flat — 2 parts
6001CMopen (no seal or shield)5100JPY 348
6001JRXCMopen (no seal or shield)5100JPY 472
shielded, one side · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6001JRXZshielded, one side5100JPY 484
6001Zshielded, one side5100JPY 607
shielded, one side · clearance CM · JIS class 0 · outer ring flat — 2 parts
6001JRXZCMshielded, one side5100JPY 559
6001ZCMshielded, one side5100JPY 494
shielded, both sides · clearance not stated · JIS class 0 · outer ring flat — 2 parts
6001JRXZZ/LP03shielded, both sides5100JPY 900
6001ZZshielded, both sides5100JPY 441
open (no seal or shield) · clearance not stated · JIS class 0 · outer ring flat — 1 part
6001open (no seal or shield)5100JPY 505
open (no seal or shield) · clearance C3 · JIS class 0 · outer ring flat — 1 part
6001C3open (no seal or shield)5100JPY 508
rubber seal · clearance not stated · JIS class 5 · outer ring flat — 1 part
6001JRXLLBP5/2ASrubber seal5100JPY 1360
shielded, one side · clearance C3 · JIS class 0 · outer ring flat — 1 part
6001JRXZC3shielded, one side5100JPY 820
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove — 1 part
6001JRXZZNX2RX3/2ASshielded, both sides5100JPY 609
shielded, both sides · clearance not stated · JIS class 5 · outer ring flat — 1 part
6001JRXZZP5/2ASshielded, both sides5100JPY 1330
shielded, both sides · clearance C3 · JIS class 0 · outer ring flat — 1 part
6001ZZC3shielded, both sides5100JPY 649
shielded, both sides · clearance not stated · JIS class 0 · outer ring with snap-ring groove (U-groove) — 1 part
6001ZZNXRX/2ASshielded, both sides5100JPY 549

Same envelope is not the same part. The groups below differ in sealing, clearance, precision class or outer-ring design; a part from one group is not a drop-in for another. Choose by what the machine is exposed to (dust, coolant, heat, speed), not by price alone.

Grouping and advice by ToolLoop: groups are built strictly from the sealing, clearance, precision and outer-ring fields in the source listing. Treating a difference in those fields as a difference in behaviour is our engineering judgement.