25 × 62 × 17 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 25 mm bore × 62 mm outside diameter × 17 mm width deep groove ball bearing, ToolLoop's index holds 48 listings across NTN and NSK. In the shielded variant the cheapest listing is NSK at ¥802 against NTN at ¥915 — a 12.3% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6305ZZshielded, both sides2060011200802source
NSK6305ZZNRshielded, both sides2060011200808source
NSK6305ZZC3shielded, both sides2060011200822source
NSK6305DDUC3rubber seal2060011200873source
NSK6305open (no seal or shield)2060011200887source
NSK6305DDUrubber seal2060011200929source
NSK6305VVrubber seal2060011200944source
NSK6305NRopen (no seal or shield)2060011200968source
NSK6305L11DDUrubber seal20600112001968source
NSK6305P5open (no seal or shield)20600112002367source
NTN6305C4open (no seal or shield)21200—810source
NTN6305CMopen (no seal or shield)21200—843source
NTN6305C3open (no seal or shield)21200—873source
NTN6305ZZCMshielded, both sides21200—915source
NTN6305ZZshielded, both sides21200—916source
NTN6305ZCMshielded, one side21200—919source
NTN6305open (no seal or shield)21200—923source
NTN6305LLUCM/5Krubber seal21200—926source
NTN6305ZZNR/2ASshielded, both sides21200—975source
NTN6305ZZCM/5Kshielded, both sides21200—979source
NTN6305ZZC3/5Kshielded, both sides21200—988source
NTN6305ZZC3shielded, both sides21200—989source
NTN6305ZC3shielded, one side21200—1003source
NTN6305LLUCMrubber seal21200—1031source
NTN6305NRopen (no seal or shield)21200—1034source
NTN6305LLUC3/5Krubber seal21200—1038source
NTN6305LLBCM/5Krubber seal21200—1045source
NTN6305LLBCMrubber seal21200—1061source
NTN6305LLBNR/2ASrubber seal21200—1063source
NTN6305LLUNRrubber seal21200—1063source
NTN6305LLUNR/2ASrubber seal21200—1063source
NTN6305LLUrubber seal21200—1079source
NTN6305LBrubber seal21200—1089source
NTN6305LLBrubber seal21200—1111source
NTN6305LLBC3rubber seal21200—1119source
NTN6305ZZC4/5Kshielded, both sides2120 (inconsistent with other listings of this size)—1130source
NTN6305ZZCM/L448shielded, both sides2120 (inconsistent with other listings of this size)—1130source
NTN6305Zshielded, one side21200—1134source
NTN6305LLUC3rubber seal21200—1183source
NTN6305LUrubber seal2120 (inconsistent with other listings of this size)—1200source
NTN6305ZZNRshielded, both sides21200—1217source
NTN6305LLBNRrubber seal21200—1283source
NTN6305L1open (no seal or shield)2120 (inconsistent with other listings of this size)—1300source
NTN6305L1C3open (no seal or shield)2120 (inconsistent with other listings of this size)—1300source
NTN6305ZZ/LP03shielded, both sides2120 (inconsistent with other listings of this size)—1300source
NTN6305LLB/LP03rubber seal2120 (inconsistent with other listings of this size)—1390source
NTN6305LLU/LP03rubber seal2120 (inconsistent with other listings of this size)—1390source
NTN6305LLBC3/5Krubber seal21200—1450source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 25 mm bore falls in the ISO 286 band 18–30 mm, where IT7 is 21 µm wide. If the shaft seat is machined to h6, the shaft measures 24.987 to 25.000 mm; a H7/h6 pair at this nominal gives 0 to +34 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.