30 × 62 × 16 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 30 mm bore × 62 mm outside diameter × 16 mm width deep groove ball bearing, ToolLoop's index holds 56 listings across NTN and NSK. In the open variant the cheapest listing is NSK at ¥572 against NTN at ¥730 — a 21.6% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6206C3Eopen (no seal or shield)1950011300572source
NSK6206C4open (no seal or shield)1950011300581source
NSK6206ZZC3shielded, both sides1950011300758source
NSK6206ZZshielded, both sides1950011300774source
NSK6206DDUC3rubber seal1950011300817source
NSK6206ZZNRshielded, both sides1950011300855source
NSK6206DDUrubber seal1950011300873source
NSK6206VVrubber seal1950011300873source
NSK6206VVC3rubber seal1950011300877source
NSK6206Zshielded, one side1950011300942source
NSK6206NRopen (no seal or shield)19500113001119source
NSK6206VVNRrubber seal19500113001545source
NSK6206P5open (no seal or shield)19500113002308source
NSK6206L11DDUrubber seal19500113002393source
NSK6206-H-20T1XZZshielded, both sides19500113002738source
NTN6206CMopen (no seal or shield)19500—730source
NTN6206C2open (no seal or shield)19500—777source
NTN6206ZCMshielded, one side19500—783source
NTN6206ZZshielded, both sides19500—802source
NTN6206Zshielded, one side19500—822source
NTN6206ZC3shielded, one side19500—841source
NTN6206LLBCM/5Krubber seal19500—852source
NTN6206LLUCMrubber seal19500—859source
NTN6206ZZCM/5Kshielded, both sides19500—867source
NTN6206ZZC3/5Kshielded, both sides19500—869source
NTN6206open (no seal or shield)19500—882source
NTN6206C3open (no seal or shield)19500—892source
NTN6206LBrubber seal19500—918source
NTN6206ZC4shielded, one side19500—918source
NTN6206LLUCM/5Krubber seal19500—933source
NTN6206LLBC3rubber seal19500—947source
NTN6206LLUrubber seal19500—959source
NTN6206LLUC3/5Krubber seal19500—962source
NTN6206NRopen (no seal or shield)19500—973source
NTN6206ZZC3shielded, both sides19500—979source
NTN6206C4open (no seal or shield)19500—1010source
NTN6206LLBCMrubber seal19500—1034source
NTN6206ZZC3/L448shielded, both sides19500—1080source
NTN6206ZZC4/5Kshielded, both sides19500—1080source
NTN6206LLBrubber seal19500—1112source
NTN6206ZZNR/2ASshielded, both sides19500—1144source
NTN6206LLUC3rubber seal19500—1154source
NTN6206ZZCMshielded, both sides19500—1157source
NTN6206ZNRshielded, one side19500—1170source
NTN6206ZZ/LP03shielded, both sides19500—1220source
NTN6206LUrubber seal19500—1222source
NTN6206LLBNR/2ASrubber seal19500—1230source
NTN6206LLUNR/2ASrubber seal19500—1230source
NTN6206L1C3rubber seal19500—1240source
NTN6206LLB/LP03rubber seal19500—1320source
NTN6206LLU/LP03rubber seal19500—1320source
NTN6206LLBC3/5Krubber seal19500—1329source
NTN6206ZZNRshielded, both sides19500—1371source
NTN6206ZZP5/2ASshielded, both sides19500—2100source
NTN6206LLBP5/2ASrubber seal19500—2465source
NTN6206LLBP5rubber seal19500—2666source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 30 mm bore falls in the ISO 286 band 18–30 mm, where IT7 is 21 µm wide. If the shaft seat is machined to h6, the shaft measures 29.987 to 30.000 mm; a H7/h6 pair at this nominal gives 0 to +34 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.