70 × 125 × 24 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 70 mm bore × 125 mm outside diameter × 24 mm width deep groove ball bearing, ToolLoop's index holds 31 listings across NTN and NSK. In the shielded variant the cheapest listing is NTN at ¥2,835 against NSK at ¥3,286 — a 15.9% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6214C3Eopen (no seal or shield)62000440002558source
NSK6214ZZshielded, both sides62000440003286source
NSK6214VVC3rubber seal62000440003352source
NSK6214NRopen (no seal or shield)62000440003515source
NSK6214open (no seal or shield)62000440003732source
NSK6214Zshielded, one side62000440003928source
NSK6214Mopen (no seal or shield)62000440003948source
NSK6214MC3open (no seal or shield)62000440004144source
NSK6214DDUrubber seal62000440004247source
NSK6214VVrubber seal62000440004271source
NSK6214P5open (no seal or shield)62000440009306source
NTN6214CMopen (no seal or shield)62000—2821source
NTN6214ZCMshielded, one side62000—2835source
NTN6214LLUCMrubber seal62000—3007source
NTN6214C3open (no seal or shield)62000—3100source
NTN6214Zshielded, one side62000—3115source
NTN6214ZZC3shielded, both sides62000—3196source
NTN6214ZZC3/5Kshielded, both sides62000—3289source
NTN6214ZZCM/5Kshielded, both sides62000—3289source
NTN6214LLUC3rubber seal62000—3319source
NTN6214ZZCMshielded, both sides62000—3461source
NTN6214open (no seal or shield)62000—3523source
NTN6214ZZshielded, both sides62000—3704source
NTN6214LLBrubber seal62000—3826source
NTN6214LLUCM/5Krubber seal62000—3927source
NTN6214LLUC3/5Krubber seal62000—3978source
NTN6214LLUrubber seal62000—4213source
NTN6214ZC3shielded, one side62000—4590source
NTN6214LLBC3/5Krubber seal62000—4799source
NTN6214ZZNR/2ASshielded, both sides62000—4990source
NTN6214L1rubber seal62000—5310source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 70 mm bore falls in the ISO 286 band 50–80 mm, where IT7 is 30 µm wide. If the shaft seat is machined to h6, the shaft measures 69.981 to 70.000 mm; a H7/h6 pair at this nominal gives 0 to +49 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.