35 × 47 × 7 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 35 mm bore × 47 mm outside diameter × 7 mm width deep groove ball bearing, ToolLoop's index holds 27 listings across NTN and NSK. In the shielded variant the cheapest listing is NTN at ¥1,270 against NSK at ¥1,516 — a 19.4% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6807open (no seal or shield)490041001187source
NSK6807DDrubber seal490041001385source
NSK6807VVrubber seal490041001507source
NSK6807DDUrubber seal490041001514source
NSK6807ZZshielded, both sides490041001516source
NTN6807JRLLBCMrubber seal4900—1230source
NTN6807LLBCMrubber seal4900—1230source
NTN6807LLBCM/5Krubber seal4900—1230source
NTN6807LLU/5Krubber seal4900—1230source
NTN6807LLU/2ASrubber seal4900—1240source
NTN6807ZZNR/2ASshielded, both sides4900—1270source
NTN6807ZZ/2ASshielded, both sides4900—1283source
NTN6807JRLLBCM/5Krubber seal4900—1287source
NTN6807JRopen (no seal or shield)4900—1335source
NTN6807JRZZshielded, both sides4900—1380source
NTN6807JRLLU/2ASrubber seal4900—1418source
NTN6807JRLLU/5Krubber seal4900—1418source
NTN6807JRLLBrubber seal4900—1478source
NTN6807JRNRopen (no seal or shield)4900—1500source
NTN6807ZZshielded, both sides4900—1511source
NTN6807LLB/2ASrubber seal4900—1513source
NTN6807open (no seal or shield)4900—1543source
NTN6807JRZZNR/2ASshielded, both sides4900—1620source
NTN6807ZZNRshielded, both sides4900—1768source
NTN6807LLUrubber seal4900—1828source
NTN6807LLBrubber seal4900—1861source
NTN6807JRLLUrubber seal4900—1936source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 35 mm bore falls in the ISO 286 band 30–50 mm, where IT7 is 25 µm wide. If the shaft seat is machined to h6, the shaft measures 34.984 to 35.000 mm; a H7/h6 pair at this nominal gives 0 to +41 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.