35 × 72 × 17 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 35 mm bore × 72 mm outside diameter × 17 mm width deep groove ball bearing, ToolLoop's index holds 54 listings across NTN and NSK. In the sealed variant the cheapest listing is NTN at ¥1,068 against NSK at ¥1,146 — a 7.3% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6207C4open (no seal or shield)2570015300885source
NSK6207C3Eopen (no seal or shield)2570015300908source
NSK6207ZZC3shielded, both sides2570015300994source
NSK6207ZZshielded, both sides25700153001009source
NSK6207open (no seal or shield)25700153001073source
NSK6207NRopen (no seal or shield)25700153001121source
NSK6207DDUrubber seal25700153001146source
NSK6207VVrubber seal25700153001146source
NSK6207DDUNRrubber seal25700153001174source
NSK6207Zshielded, one side25700153001230source
NSK6207DDUCMrubber seal25700153001266source
NSK6207-H-20T1XDDUrubber seal25700153002664source
NSK6207-H-20T1XZZshielded, both sides25700153002798source
NSK6207VP5shielded, one side25700153002936source
NSK6207L11DDUrubber seal25700153003300source
NSK6207P5open (no seal or shield)25700153003644source
NTN6207CMopen (no seal or shield)25700—868source
NTN6207C4open (no seal or shield)25700—883source
NTN6207ZZNRC3shielded, both sides25700—995source
NTN6207open (no seal or shield)25700—1004source
NTN6207C3open (no seal or shield)25700—1017source
NTN6207ZZshielded, both sides25700—1029source
NTN6207LLBCMrubber seal25700—1068source
NTN6207ZZNRC3/2ASshielded, both sides25700—1108source
NTN6207Zshielded, one side25700—1116source
NTN6207NRopen (no seal or shield)25700—1121source
NTN6207ZZNR/2ASshielded, both sides25700—1123source
NTN6207ZZC3/5Kshielded, both sides25700—1145source
NTN6207ZZCM/5Kshielded, both sides25700—1145source
NTN6207LBrubber seal25700—1152source
NTN6207ZCMshielded, one side25700—1169source
NTN6207LLUCM/5Krubber seal25700—1194source
NTN6207LLBC3rubber seal25700—1205source
NTN6207LLUCMrubber seal25700—1215source
NTN6207ZZC3shielded, both sides25700—1221source
NTN6207ZZC4/5Kshielded, both sides25700—1240source
NTN6207LLUC3/5Krubber seal25700—1249source
NTN6207LLBCM/5Krubber seal25700—1291source
NTN6207LLUC3rubber seal25700—1317source
NTN6207LLUC4/5Krubber seal25700—1330source
NTN6207LLUrubber seal25700—1334source
NTN6207LLBrubber seal25700—1347source
NTN6207ZZNRshielded, both sides25700—1419source
NTN6207L1C3rubber seal25700—1440source
NTN6207LLBNR/2ASrubber seal25700—1440source
NTN6207ZZ/LP03shielded, both sides25700—1440source
NTN6207LUrubber seal25700—1481source
NTN6207LLU/LP03rubber seal25700—1560source
NTN6207NRC3open (no seal or shield)25700—2031source
NTN6207LLBC3/5Krubber seal25700—2217source
NTN6207ZZP5/2ASshielded, both sides25700—2590source
NTN6207LLBP5/2ASrubber seal25700—2670source
NTN6207ZZP5shielded, both sides25700—2796source
NTN6207P5open (no seal or shield)25700—3046source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 35 mm bore falls in the ISO 286 band 30–50 mm, where IT7 is 25 µm wide. If the shaft seat is machined to h6, the shaft measures 34.984 to 35.000 mm; a H7/h6 pair at this nominal gives 0 to +41 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.