50 × 90 × 20 mm bearing: NTN and NSK part numbers and JPY prices

Short answer (free to quote): For a 50 mm bore × 90 mm outside diameter × 20 mm width deep groove ball bearing, ToolLoop's index holds 49 listings across NTN and NSK. In the sealed variant the cheapest listing is NTN at ¥1,727 against NSK at ¥1,889 — a 9.4% difference (MISUMI Japan list prices, fetched 2026-11-15).
Prices and dimensions from MISUMI Japan, fetched 2026-11-15; comparison by ToolLoop
What is the distributor's, what is oursBoundary dimensions, sealing, load ratings, the static rating where the listing gives one, and the JPY list price: taken from the MISUMI Japan listing for each brand, translated but not altered. The cheapest-in-variant pick, the percentage gap and every remark about which listing is worth looking at: ToolLoop's calculation. Neither NTN nor NSK has stated an interchangeability opinion that is reproduced here.

Every listing in this size

BrandPart numberSealingC (N)C0 (N)List price (JPY)Source
NSK6210C3Eopen (no seal or shield)35000232001598source
NSK6210VVC3rubber seal35000232001889source
NSK6210ZZshielded, both sides35000232001917source
NSK6210open (no seal or shield)35000232001948source
NSK6210NRopen (no seal or shield)35000232001952source
NSK6210ZZC3shielded, both sides35000232001972source
NSK6210MC3open (no seal or shield)35000232002045source
NSK6210Mopen (no seal or shield)35000232002082source
NSK6210DDUrubber seal35000232002191source
NSK6210Zshielded, one side35000232002241source
NSK6210VVrubber seal35000232002265source
NSK6210ZZNRshielded, both sides35000232002300source
NSK6210P5open (no seal or shield)35000232005500source
NSK6210L11DDUrubber seal35000232005846source
NSK6210-H-20DDUrubber seal350002320026747source
NSK6210-H-20ZZshielded, both sides350002320026747source
NTN6210CMopen (no seal or shield)35000—1674source
NTN6210LLBCMrubber seal35000—1727source
NTN6210ZC3shielded, one side35000—1780source
NTN6210ZC4shielded, one side35000—1780source
NTN6210ZZ/2ASshielded, both sides35000—1780source
NTN6210ZZC4/2ASshielded, both sides35000—1780source
NTN6210NRopen (no seal or shield)35000—1809source
NTN6210ZCMshielded, one side35000—1812source
NTN6210ZZC3/5Kshielded, both sides35000—1864source
NTN6210open (no seal or shield)35000—1894source
NTN6210LLBrubber seal35000—1898source
NTN6210ZZCM/5Kshielded, both sides35000—1908source
NTN6210ZZCMshielded, both sides35000—1910source
NTN6210C3open (no seal or shield)35000—1938source
NTN6210ZZNRshielded, both sides35000—1998source
NTN6210ZZNR/2ASshielded, both sides35000—1999source
NTN6210ZNRshielded, one side35000—2000source
NTN6210Zshielded, one side35000—2004source
NTN6210LBrubber seal35000—2040source
NTN6210LLBCM/5Krubber seal35000—2050source
NTN6210LLUC3/5Krubber seal35000—2059source
NTN6210LLUC3rubber seal35000—2080source
NTN6210LLBC3rubber seal35000—2118source
NTN6210ZZshielded, both sides35000—2124source
NTN6210L1C3rubber seal35000—2160source
NTN6210LLUNR/2ASrubber seal35000—2160source
NTN6210ZZC3shielded, both sides35000—2346source
NTN6210LLUrubber seal35000—2358source
NTN6210LLUCMrubber seal35000—2362source
NTN6210LLUCM/5Krubber seal35000—2434source
NTN6210LLBC3/5Krubber seal35000—2475source
NTN6210ZZP5/2ASshielded, both sides35000—5446source
NTN6210ZZP5shielded, both sides35000—6028source
Written by ToolLoop: same boundary dimensions means the two brands drop into the same seat. It does not mean the same load rating, the same speed ceiling or the same internal clearance — compare the C and C0 columns above before treating them as equals.

The seat this bearing needs

A 50 mm bore falls in the ISO 286 band 30–50 mm, where IT7 is 25 µm wide. If the shaft seat is machined to h6, the shaft measures 49.984 to 50.000 mm; a H7/h6 pair at this nominal gives 0 to +41 µm.

Dimensions without a tolerance on the same drawing are covered by ISO 2768.