H7/d9 at a 25 mm nominal: hole 0/+21 µm (25.000–25.021 mm), shaft -117/-65 µm (24.883–24.935 mm), giving a clearance of +65 to +138 µm — a clearance fit (calculated by ToolLoop from ISO 286-1:2010, checked 2026-11-15).Same fit, thirteen size bands. Limits are the deviations in µm; clearance is hole minus shaft, so a negative number is interference.
| Size band | Hole EI/ES (µm) | Shaft ei/es (µm) | Clearance (µm) | Type |
|---|---|---|---|---|
| 0–3 mm | 0 / +10 | -45 / -20 | +20 … +55 | clearance |
| 3–6 mm | 0 / +12 | -60 / -30 | +30 … +72 | clearance |
| 6–10 mm | 0 / +15 | -76 / -40 | +40 … +91 | clearance |
| 10–18 mm | 0 / +18 | -93 / -50 | +50 … +111 | clearance |
| 18–30 mm | 0 / +21 | -117 / -65 | +65 … +138 | clearance |
| 30–50 mm | 0 / +25 | -142 / -80 | +80 … +167 | clearance |
| 50–80 mm | 0 / +30 | -174 / -100 | +100 … +204 | clearance |
| 80–120 mm | 0 / +35 | -207 / -120 | +120 … +242 | clearance |
| 120–180 mm | 0 / +40 | -245 / -145 | +145 … +285 | clearance |
| 180–250 mm | 0 / +46 | -285 / -170 | +170 … +331 | clearance |
| 250–315 mm | 0 / +52 | -320 / -190 | +190 … +372 | clearance |
| 315–400 mm | 0 / +57 | -350 / -210 | +210 … +407 | clearance |
| 400–500 mm | 0 / +63 | -385 / -230 | +230 … +448 | clearance |
ottonic/standards-mcp-server (src/domain/iso286.ts, MIT); cross-checked against clay-good/anvilate (tolerance/data/iso286_*.yaml, MIT) and chenzefeng09/iso-286-fits (fits.json, MIT). 393 overlapping cells compared, 0 disagreements, checked 2026-11-15.Bearing seats are the usual place a drawing carries one of these fits. 18–30 mm band · all fits · ISO 2768 general tolerances
ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.