ISO 286 tolerances for 400–500 mm: IT grades and fit limits

Short answer (free to quote): In the 400–500 mm band of ISO 286-1, IT7 is 63 µm wide and IT6 is 40 µm, so an H7/h6 pair at a nominal 450 mm can move between 0 and +103 µm (calculated by ToolLoop, checked 2026-11-15). There are 5 deep groove ball bearing listings in ToolLoop's index with a bore in this band.
ISO 286-1:2010 tables; counts from the MISUMI Japan listing, fetched 2026-11-15
What is standard text, what is our arithmeticThe tolerance and deviation values are the tabulated values of ISO 286-1:2010 / ISO 2768-1:1989, taken from three independently published open datasets and compared cell by cell; only cells where all datasets that carry them agree are shown. The standard documents themselves are not reproduced. The limit sizes in millimetres, the clearance/interference ranges and every sentence about which fit is used for what are calculated or written by ToolLoop — they are not quoted from the standard.

Tolerance widths in this band

GradeWidth (µm)H hole EI/ES (µm)h shaft ei/es (µm)
IT5270 / +27+27 / 0
IT6400 / +40+40 / 0
IT7630 / +63+63 / 0
IT8970 / +97+97 / 0
IT91550 / +155+155 / 0
IT102500 / +250+250 / 0
IT114000 / +400+400 / 0

Fits in this band

FitHole EI/ESShaft ei/esClearance (µm)
H7/h60 / +63-40 / 00 … +103
H7/g60 / +63-60 / -20+20 … +123
H7/f70 / +63-131 / -68+68 … +194
H7/e80 / +63-232 / -135+135 … +295
H7/d90 / +63-385 / -230+230 … +448
H7/js60 / +63-20 / +20-20 … +83
H7/k60 / +63+5 / +45-45 … +58
H7/m60 / +63+23 / +63-63 … +40
H7/n60 / +63+40 / +80-80 … +23
H7/p60 / +63+68 / +108-108 … -5
H7/r60 / +63+126 / +166-166 … -63
H7/s60 / +63+232 / +272-272 … -169
H8/f70 / +97-131 / -68+68 … +228
H8/h70 / +97-63 / 00 … +160
H9/d90 / +155-385 / -230+230 … +540
H11/c110 / +400-840 / -440+440 … +1240
Provenance: primary table ottonic/standards-mcp-server (src/domain/iso286.ts, MIT); cross-checked against clay-good/anvilate (tolerance/data/iso286_*.yaml, MIT) and chenzefeng09/iso-286-fits (fits.json, MIT). 393 overlapping cells compared, 0 disagreements, checked 2026-11-15.

Deep groove ball bearings with a bore in this band

5 listings; first 40 by bore.

Part numberBrandd × D × B (mm)SealingList price (JPY)
6084MNSK420 × 620 × 90open (no seal or shield)567250
6984MNSK420 × 560 × 65open (no seal or shield)392745
6892MNSK460 × 580 × 56open (no seal or shield)425179
6992MNSK460 × 620 × 74open (no seal or shield)471551
6996MNSK480 × 650 × 78open (no seal or shield)697681