H7/e8 at a 25 mm nominal: hole 0/+21 µm (25.000–25.021 mm), shaft -73/-40 µm (24.927–24.960 mm), giving a clearance of +40 to +94 µm — a clearance fit (calculated by ToolLoop from ISO 286-1:2010, checked 2026-11-15).Same fit, thirteen size bands. Limits are the deviations in µm; clearance is hole minus shaft, so a negative number is interference.
| Size band | Hole EI/ES (µm) | Shaft ei/es (µm) | Clearance (µm) | Type |
|---|---|---|---|---|
| 0–3 mm | 0 / +10 | -28 / -14 | +14 … +38 | clearance |
| 3–6 mm | 0 / +12 | -38 / -20 | +20 … +50 | clearance |
| 6–10 mm | 0 / +15 | -47 / -25 | +25 … +62 | clearance |
| 10–18 mm | 0 / +18 | -59 / -32 | +32 … +77 | clearance |
| 18–30 mm | 0 / +21 | -73 / -40 | +40 … +94 | clearance |
| 30–50 mm | 0 / +25 | -89 / -50 | +50 … +114 | clearance |
| 50–80 mm | 0 / +30 | -106 / -60 | +60 … +136 | clearance |
| 80–120 mm | 0 / +35 | -126 / -72 | +72 … +161 | clearance |
| 120–180 mm | 0 / +40 | -148 / -85 | +85 … +188 | clearance |
| 180–250 mm | 0 / +46 | -172 / -100 | +100 … +218 | clearance |
| 250–315 mm | 0 / +52 | -191 / -110 | +110 … +243 | clearance |
| 315–400 mm | 0 / +57 | -214 / -125 | +125 … +271 | clearance |
| 400–500 mm | 0 / +63 | -232 / -135 | +135 … +295 | clearance |
ottonic/standards-mcp-server (src/domain/iso286.ts, MIT); cross-checked against clay-good/anvilate (tolerance/data/iso286_*.yaml, MIT) and chenzefeng09/iso-286-fits (fits.json, MIT). 393 overlapping cells compared, 0 disagreements, checked 2026-11-15.Bearing seats are the usual place a drawing carries one of these fits. 18–30 mm band · all fits · ISO 2768 general tolerances
ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.