H7/g6 at a 25 mm nominal: hole 0/+21 µm (25.000–25.021 mm), shaft -20/-7 µm (24.980–24.993 mm), giving a clearance of +7 to +41 µm — a clearance fit (calculated by ToolLoop from ISO 286-1:2010, checked 2026-11-15).Same fit, thirteen size bands. Limits are the deviations in µm; clearance is hole minus shaft, so a negative number is interference.
| Size band | Hole EI/ES (µm) | Shaft ei/es (µm) | Clearance (µm) | Type |
|---|---|---|---|---|
| 0–3 mm | 0 / +10 | -8 / -2 | +2 … +18 | clearance |
| 3–6 mm | 0 / +12 | -12 / -4 | +4 … +24 | clearance |
| 6–10 mm | 0 / +15 | -14 / -5 | +5 … +29 | clearance |
| 10–18 mm | 0 / +18 | -17 / -6 | +6 … +35 | clearance |
| 18–30 mm | 0 / +21 | -20 / -7 | +7 … +41 | clearance |
| 30–50 mm | 0 / +25 | -25 / -9 | +9 … +50 | clearance |
| 50–80 mm | 0 / +30 | -29 / -10 | +10 … +59 | clearance |
| 80–120 mm | 0 / +35 | -34 / -12 | +12 … +69 | clearance |
| 120–180 mm | 0 / +40 | -39 / -14 | +14 … +79 | clearance |
| 180–250 mm | 0 / +46 | -44 / -15 | +15 … +90 | clearance |
| 250–315 mm | 0 / +52 | -49 / -17 | +17 … +101 | clearance |
| 315–400 mm | 0 / +57 | -54 / -18 | +18 … +111 | clearance |
| 400–500 mm | 0 / +63 | -60 / -20 | +20 … +123 | clearance |
ottonic/standards-mcp-server (src/domain/iso286.ts, MIT); cross-checked against clay-good/anvilate (tolerance/data/iso286_*.yaml, MIT) and chenzefeng09/iso-286-fits (fits.json, MIT). 393 overlapping cells compared, 0 disagreements, checked 2026-11-15.Bearing seats are the usual place a drawing carries one of these fits. 18–30 mm band · all fits · ISO 2768 general tolerances
ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.