H7/js6 at a 25 mm nominal: hole 0/+21 µm (25.000–25.021 mm), shaft -6.5/+6.5 µm (24.994–25.006 mm), giving a clearance of -6.5 to +27.5 µm — a transition fit (calculated by ToolLoop from ISO 286-1:2010, checked 2026-11-15).Same fit, thirteen size bands. Limits are the deviations in µm; clearance is hole minus shaft, so a negative number is interference.
| Size band | Hole EI/ES (µm) | Shaft ei/es (µm) | Clearance (µm) | Type |
|---|---|---|---|---|
| 0–3 mm | 0 / +10 | -3 / +3 | -3 … +13 | transition |
| 3–6 mm | 0 / +12 | -4 / +4 | -4 … +16 | transition |
| 6–10 mm | 0 / +15 | -4.5 / +4.5 | -4.5 … +19.5 | transition |
| 10–18 mm | 0 / +18 | -5.5 / +5.5 | -5.5 … +23.5 | transition |
| 18–30 mm | 0 / +21 | -6.5 / +6.5 | -6.5 … +27.5 | transition |
| 30–50 mm | 0 / +25 | -8 / +8 | -8 … +33 | transition |
| 50–80 mm | 0 / +30 | -9.5 / +9.5 | -9.5 … +39.5 | transition |
| 80–120 mm | 0 / +35 | -11 / +11 | -11 … +46 | transition |
| 120–180 mm | 0 / +40 | -12.5 / +12.5 | -12.5 … +52.5 | transition |
| 180–250 mm | 0 / +46 | -14.5 / +14.5 | -14.5 … +60.5 | transition |
| 250–315 mm | 0 / +52 | -16 / +16 | -16 … +68 | transition |
| 315–400 mm | 0 / +57 | -18 / +18 | -18 … +75 | transition |
| 400–500 mm | 0 / +63 | -20 / +20 | -20 … +83 | transition |
ottonic/standards-mcp-server (src/domain/iso286.ts, MIT); cross-checked against clay-good/anvilate (tolerance/data/iso286_*.yaml, MIT) and chenzefeng09/iso-286-fits (fits.json, MIT). 393 overlapping cells compared, 0 disagreements, checked 2026-11-15.Bearing seats are the usual place a drawing carries one of these fits. 18–30 mm band · all fits · ISO 2768 general tolerances
ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.