H7/n6 at a 25 mm nominal: hole 0/+21 µm (25.000–25.021 mm), shaft +15/+28 µm (25.015–25.028 mm), giving a clearance of -28 to +6 µm — a transition fit (calculated by ToolLoop from ISO 286-1:2010, checked 2026-11-15).Same fit, thirteen size bands. Limits are the deviations in µm; clearance is hole minus shaft, so a negative number is interference.
| Size band | Hole EI/ES (µm) | Shaft ei/es (µm) | Clearance (µm) | Type |
|---|---|---|---|---|
| 0–3 mm | 0 / +10 | +4 / +10 | -10 … +6 | transition |
| 3–6 mm | 0 / +12 | +8 / +16 | -16 … +4 | transition |
| 6–10 mm | 0 / +15 | +10 / +19 | -19 … +5 | transition |
| 10–18 mm | 0 / +18 | +12 / +23 | -23 … +6 | transition |
| 18–30 mm | 0 / +21 | +15 / +28 | -28 … +6 | transition |
| 30–50 mm | 0 / +25 | +17 / +33 | -33 … +8 | transition |
| 50–80 mm | 0 / +30 | +20 / +39 | -39 … +10 | transition |
| 80–120 mm | 0 / +35 | +23 / +45 | -45 … +12 | transition |
| 120–180 mm | 0 / +40 | +27 / +52 | -52 … +13 | transition |
| 180–250 mm | 0 / +46 | +31 / +60 | -60 … +15 | transition |
| 250–315 mm | 0 / +52 | +34 / +66 | -66 … +18 | transition |
| 315–400 mm | 0 / +57 | +37 / +73 | -73 … +20 | transition |
| 400–500 mm | 0 / +63 | +40 / +80 | -80 … +23 | transition |
ottonic/standards-mcp-server (src/domain/iso286.ts, MIT); cross-checked against clay-good/anvilate (tolerance/data/iso286_*.yaml, MIT) and chenzefeng09/iso-286-fits (fits.json, MIT). 393 overlapping cells compared, 0 disagreements, checked 2026-11-15.Bearing seats are the usual place a drawing carries one of these fits. 18–30 mm band · all fits · ISO 2768 general tolerances
ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.