H8/f7 at a 25 mm nominal: hole 0/+33 µm (25.000–25.033 mm), shaft -41/-20 µm (24.959–24.980 mm), giving a clearance of +20 to +74 µm — a clearance fit (calculated by ToolLoop from ISO 286-1:2010, checked 2026-11-15).Same fit, thirteen size bands. Limits are the deviations in µm; clearance is hole minus shaft, so a negative number is interference.
| Size band | Hole EI/ES (µm) | Shaft ei/es (µm) | Clearance (µm) | Type |
|---|---|---|---|---|
| 0–3 mm | 0 / +14 | -16 / -6 | +6 … +30 | clearance |
| 3–6 mm | 0 / +18 | -22 / -10 | +10 … +40 | clearance |
| 6–10 mm | 0 / +22 | -28 / -13 | +13 … +50 | clearance |
| 10–18 mm | 0 / +27 | -34 / -16 | +16 … +61 | clearance |
| 18–30 mm | 0 / +33 | -41 / -20 | +20 … +74 | clearance |
| 30–50 mm | 0 / +39 | -50 / -25 | +25 … +89 | clearance |
| 50–80 mm | 0 / +46 | -60 / -30 | +30 … +106 | clearance |
| 80–120 mm | 0 / +54 | -71 / -36 | +36 … +125 | clearance |
| 120–180 mm | 0 / +63 | -83 / -43 | +43 … +146 | clearance |
| 180–250 mm | 0 / +72 | -96 / -50 | +50 … +168 | clearance |
| 250–315 mm | 0 / +81 | -108 / -56 | +56 … +189 | clearance |
| 315–400 mm | 0 / +89 | -119 / -62 | +62 … +208 | clearance |
| 400–500 mm | 0 / +97 | -131 / -68 | +68 … +228 | clearance |
ottonic/standards-mcp-server (src/domain/iso286.ts, MIT); cross-checked against clay-good/anvilate (tolerance/data/iso286_*.yaml, MIT) and chenzefeng09/iso-286-fits (fits.json, MIT). 393 overlapping cells compared, 0 disagreements, checked 2026-11-15.Bearing seats are the usual place a drawing carries one of these fits. 18–30 mm band · all fits · ISO 2768 general tolerances
ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.