H7 is a hole tolerance: the lower deviation is zero and the upper deviation is the full IT7 width. At 25 mm that is 0 to +21 µm, i.e. a bore from 25.000 to 25.021 mm (ISO 286-1:2010 tables, checked 2026-11-15).| Size band | EI (µm) | ES (µm) | Width (µm) | Hole limits at midpoint (mm) |
|---|---|---|---|---|
| 0–3 mm | 0 | +10 | 10 | 1.500–1.510 |
| 3–6 mm | 0 | +12 | 12 | 7.500–4.512 |
| 6–10 mm | 0 | +15 | 15 | 14.000–8.015 |
| 10–18 mm | 0 | +18 | 18 | 24.000–14.018 |
| 18–30 mm | 0 | +21 | 21 | 42.000–24.021 |
| 30–50 mm | 0 | +25 | 25 | 70.000–40.025 |
| 50–80 mm | 0 | +30 | 30 | 115.000–65.030 |
| 80–120 mm | 0 | +35 | 35 | 180.000–100.035 |
| 120–180 mm | 0 | +40 | 40 | 270.000–150.040 |
| 180–250 mm | 0 | +46 | 46 | 395.000–215.046 |
| 250–315 mm | 0 | +52 | 52 | 532.500–282.552 |
| 315–400 mm | 0 | +57 | 57 | 672.500–357.557 |
| 400–500 mm | 0 | +63 | 63 | 850.000–450.063 |
ottonic/standards-mcp-server (src/domain/iso286.ts, MIT); cross-checked against clay-good/anvilate (tolerance/data/iso286_*.yaml, MIT) and chenzefeng09/iso-286-fits (fits.json, MIT). 393 overlapping cells compared, 0 disagreements, checked 2026-11-15.A capital letter is a hole, a lower-case letter a shaft; H is the hole that the whole hole-basis fit system is built on. See all fits.
ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.