H8 is a hole tolerance: the lower deviation is zero and the upper deviation is the full IT8 width. At 25 mm that is 0 to +33 µm, i.e. a bore from 25.000 to 25.033 mm (ISO 286-1:2010 tables, checked 2026-11-15).| Size band | EI (µm) | ES (µm) | Width (µm) | Hole limits at midpoint (mm) |
|---|---|---|---|---|
| 0–3 mm | 0 | +14 | 14 | 1.500–1.514 |
| 3–6 mm | 0 | +18 | 18 | 7.500–4.518 |
| 6–10 mm | 0 | +22 | 22 | 14.000–8.022 |
| 10–18 mm | 0 | +27 | 27 | 24.000–14.027 |
| 18–30 mm | 0 | +33 | 33 | 42.000–24.033 |
| 30–50 mm | 0 | +39 | 39 | 70.000–40.039 |
| 50–80 mm | 0 | +46 | 46 | 115.000–65.046 |
| 80–120 mm | 0 | +54 | 54 | 180.000–100.054 |
| 120–180 mm | 0 | +63 | 63 | 270.000–150.063 |
| 180–250 mm | 0 | +72 | 72 | 395.000–215.072 |
| 250–315 mm | 0 | +81 | 81 | 532.500–282.581 |
| 315–400 mm | 0 | +89 | 89 | 672.500–357.589 |
| 400–500 mm | 0 | +97 | 97 | 850.000–450.097 |
ottonic/standards-mcp-server (src/domain/iso286.ts, MIT); cross-checked against clay-good/anvilate (tolerance/data/iso286_*.yaml, MIT) and chenzefeng09/iso-286-fits (fits.json, MIT). 393 overlapping cells compared, 0 disagreements, checked 2026-11-15.A capital letter is a hole, a lower-case letter a shaft; H is the hole that the whole hole-basis fit system is built on. See all fits.
ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.