H9 is a hole tolerance: the lower deviation is zero and the upper deviation is the full IT9 width. At 25 mm that is 0 to +52 µm, i.e. a bore from 25.000 to 25.052 mm (ISO 286-1:2010 tables, checked 2026-11-15).| Size band | EI (µm) | ES (µm) | Width (µm) | Hole limits at midpoint (mm) |
|---|---|---|---|---|
| 0–3 mm | 0 | +25 | 25 | 1.500–1.525 |
| 3–6 mm | 0 | +30 | 30 | 7.500–4.530 |
| 6–10 mm | 0 | +36 | 36 | 14.000–8.036 |
| 10–18 mm | 0 | +43 | 43 | 24.000–14.043 |
| 18–30 mm | 0 | +52 | 52 | 42.000–24.052 |
| 30–50 mm | 0 | +62 | 62 | 70.000–40.062 |
| 50–80 mm | 0 | +74 | 74 | 115.000–65.074 |
| 80–120 mm | 0 | +87 | 87 | 180.000–100.087 |
| 120–180 mm | 0 | +100 | 100 | 270.000–150.100 |
| 180–250 mm | 0 | +115 | 115 | 395.000–215.115 |
| 250–315 mm | 0 | +130 | 130 | 532.500–282.630 |
| 315–400 mm | 0 | +140 | 140 | 672.500–357.640 |
| 400–500 mm | 0 | +155 | 155 | 850.000–450.155 |
ottonic/standards-mcp-server (src/domain/iso286.ts, MIT); cross-checked against clay-good/anvilate (tolerance/data/iso286_*.yaml, MIT) and chenzefeng09/iso-286-fits (fits.json, MIT). 393 overlapping cells compared, 0 disagreements, checked 2026-11-15.A capital letter is a hole, a lower-case letter a shaft; H is the hole that the whole hole-basis fit system is built on. See all fits.
ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.