s6 at a 25 mm nominal is +48/+35 µm, i.e. a shaft between 25.035 and 25.048 mm (calculated by ToolLoop from ISO 286-1:2010 tables, checked 2026-11-15). | Size band | es (µm) | ei (µm) | Width (µm) | Limit sizes at band midpoint (mm) |
|---|---|---|---|---|
| 0–3 mm | +20 | +14 | 6 | 1.514–1.520 |
| 3–6 mm | +27 | +19 | 8 | 4.519–4.527 |
| 6–10 mm | +32 | +23 | 9 | 8.023–8.032 |
| 10–18 mm | +39 | +28 | 11 | 14.028–14.039 |
| 18–30 mm | +48 | +35 | 13 | 24.035–24.048 |
| 30–50 mm | +59 | +43 | 16 | 40.043–40.059 |
| 50–80 mm | +72 | +53 | 19 | 65.053–65.072 |
| 80–120 mm | +93 | +71 | 22 | 100.071–100.093 |
| 120–180 mm | +125 | +100 | 25 | 150.100–150.125 |
| 180–250 mm | +159 | +130 | 29 | 215.130–215.159 |
| 250–315 mm | +202 | +170 | 32 | 282.670–282.702 |
| 315–400 mm | +244 | +208 | 36 | 357.708–357.744 |
| 400–500 mm | +272 | +232 | 40 | 450.232–450.272 |
ottonic/standards-mcp-server (src/domain/iso286.ts, MIT); cross-checked against clay-good/anvilate (tolerance/data/iso286_*.yaml, MIT) and chenzefeng09/iso-286-fits (fits.json, MIT). 393 overlapping cells compared, 0 disagreements, checked 2026-11-15.Shaft deviations are measured from the nominal size: es is the upper, ei the lower. The width always equals the IT grade for that band.
See also: H7/s6 · ISO 286 overview · ISO 2768
ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.