ISO 286 tolerances for 250–315 mm: IT grades and fit limits

Short answer (free to quote): In the 250–315 mm band of ISO 286-1, IT7 is 52 µm wide and IT6 is 32 µm, so an H7/h6 pair at a nominal 282.5 mm can move between 0 and +84 µm (calculated by ToolLoop, checked 2026-11-15). There are 8 deep groove ball bearing listings in ToolLoop's index with a bore in this band.
ISO 286-1:2010 tables; counts from the MISUMI Japan listing, fetched 2026-11-15
What is standard text, what is our arithmeticThe tolerance and deviation values are the tabulated values of ISO 286-1:2010 / ISO 2768-1:1989, taken from three independently published open datasets and compared cell by cell; only cells where all datasets that carry them agree are shown. The standard documents themselves are not reproduced. The limit sizes in millimetres, the clearance/interference ranges and every sentence about which fit is used for what are calculated or written by ToolLoop — they are not quoted from the standard.

Tolerance widths in this band

GradeWidth (µm)H hole EI/ES (µm)h shaft ei/es (µm)
IT5230 / +23+23 / 0
IT6320 / +32+32 / 0
IT7520 / +52+52 / 0
IT8810 / +81+81 / 0
IT91300 / +130+130 / 0
IT102100 / +210+210 / 0
IT113200 / +320+320 / 0

Fits in this band

FitHole EI/ESShaft ei/esClearance (µm)
H7/h60 / +52-32 / 00 … +84
H7/g60 / +52-49 / -17+17 … +101
H7/f70 / +52-108 / -56+56 … +160
H7/e80 / +52-191 / -110+110 … +243
H7/d90 / +52-320 / -190+190 … +372
H7/js60 / +52-16 / +16-16 … +68
H7/k60 / +52+4 / +36-36 … +48
H7/m60 / +52+20 / +52-52 … +32
H7/n60 / +52+34 / +66-66 … +18
H7/p60 / +52+56 / +88-88 … -4
H7/r60 / +52+98 / +130-130 … -46
H7/s60 / +52+170 / +202-202 … -118
H8/f70 / +81-108 / -56+56 … +189
H8/h70 / +81-52 / 00 … +133
H9/d90 / +130-320 / -190+190 … +450
H11/c110 / +320-650 / -330+330 … +970
Provenance: primary table ottonic/standards-mcp-server (src/domain/iso286.ts, MIT); cross-checked against clay-good/anvilate (tolerance/data/iso286_*.yaml, MIT) and chenzefeng09/iso-286-fits (fits.json, MIT). 393 overlapping cells compared, 0 disagreements, checked 2026-11-15.

Deep groove ball bearings with a bore in this band

8 listings; first 40 by bore.

Part numberBrandd × D × B (mm)SealingList price (JPY)
6052NTN260 × 400 × 65open (no seal or shield)122589
6852NTN260 × 320 × 28open (no seal or shield)102979
6252MNSK260 × 480 × 80open (no seal or shield)532164
6856NTN280 × 350 × 33open (no seal or shield)123461
6056MNSK280 × 420 × 65open (no seal or shield)215310
6856MNSK280 × 350 × 33open (no seal or shield)99010
6860NTN300 × 380 × 38open (no seal or shield)166231
6960NTN300 × 420 × 56open (no seal or shield)139241