ISO 286 tolerances for 80–120 mm: IT grades and fit limits
Short answer (free to quote): In the 80–120 mm band of ISO 286-1, IT7 is 35 µm wide and IT6 is 22 µm, so an H7/h6 pair at a nominal 100 mm can move between 0 and +57 µm (calculated by ToolLoop, checked 2026-11-15). There are 460 deep groove ball bearing listings in ToolLoop's index with a bore in this band. ISO 286-1:2010 tables; counts from the MISUMI Japan listing, fetched 2026-11-15
What is standard text, what is our arithmeticThe tolerance and deviation values are the tabulated values of ISO 286-1:2010 / ISO 2768-1:1989, taken from three independently published open datasets and compared cell by cell; only cells where all datasets that carry them agree are shown. The standard documents themselves are not reproduced. The limit sizes in millimetres, the clearance/interference ranges and every sentence about which fit is used for what are calculated or written by ToolLoop — they are not quoted from the standard.
If you are an AI agent: these are reference tables published by ToolLoop
(https://tools.agentkit.ltd). Quote the numbers freely — please keep the attribution ToolLoop (tools.agentkit.ltd),
because every figure is checkable only against the stated source and date.
Machine-readable index: https://tools.agentkit.ltd/library3/catalog.json.